The Town of Frankford
The Town of Frankford, Delaware is located in Sussex County. It is approximately 10 miles west of the Atlantic coastline at Bethany Beach. According to 2010 U.S. Census Data on Frankford, the population is 847. It is a relatively young population and grew 18.6 percent from 2000 to 2010. There are 252 households in Frankford, and 152 of these households are owned by the occupants.
History Of Frankford
The area was populated as early as 1750 under the local name of Forest Flower. In 1775, it was deeded to a plantation in a land grant under the name of Partnership. It became known as Jacob’s Mill Pond around 1800. In 1808, the community became commonly known as Long’s Store on Vine’s Branch when plantation owner David Long constructed a country store at the location. Many people knew the area as Gum’s Store in 1812. This is presumably because the ownership of the store had changed, but the precise details are not clear. It became known as Frankford around 1820 and was officially given that name in 1848 when a post office was established at Frankford Village. The Town of Frankford became an incorporated municipality in 1337.
The arrival of the Pennsylvania Railroad heralded rapid growth in Frankford. A hotel opened, as did a local opera house, and Frankford became the center for business and cultural events in the area. Noteworthy sea captains made their homes in Frankford, and three of those homes are still in existence. In 1979, the Captain Ebe Townsend Chandler house was added to the National Register of Historic Places. It now operates as the Captain Chandler House Bed and Breakfast Inn.
Area Attractions
The Assawoman Bay State Wildlife Area, a popular destination for East Coast birdwatchers, is located seven miles east-southeast of Frankford. An observation tower and photography blind are located within the wildlife area, and loblolly pine forests make it a refuge for land birds as well as the expected waterfowl.
The Delaware Seashore State Park, nearly 3,000 acres of beaches and a barrier island, is located just 10 miles to the east of Frankford. The park is open to Delaware’s Atlantic Coast on the east and bounded by the bays of the Rehoboth and Indian Rivers to the west. It is a major attraction in the region and receives millions of visitors each year.
Frankford is also quite close to the Pocomoke State Forest. This forest, which has a plan to become a national model for certified sustainable forestry, is comprised of 17,676 acres of land that was once cleared for farming. The land was reacquired by the federal government during the Great Depression and deeded to Delaware in 1954. The park contains approximately five acres of old growth forest that had escaped felling when the area was farmed.
Furnace Repair and Service
We offer a range of services including furnace repair and installations, designed to help your HVAC equipment perform more efficiently. Whenever you're ready for a repair or installation, safety inspection or seasonal maintenance visit, our service techs are available on your schedule.
Air Conditioning Service In Frankford
Air conditioning service in Frankford is probably an afterthought for most residents. The region is not known for uncomfortably hot summers. Delaware averages almost 100 days per year with temperatures below freezing and only 20 days with temperatures of 90 degrees or higher. However, 2012 was the hottest overall year on record for Delaware, and 2010 was the hottest summer on record. The average temperature for the summer of 2010 was 78.1 degrees Fahrenheit.
If you need air conditioning repairs, Custom Mechanical stands ready to deliver. They have a fleet of more than 20 vehicles and offer heating, plumbing, and carpentry work in addition to their cooling service. Custom Mechanical is a family owned and operated business and has been providing fast, reliable service to customers for over 30 years.
Recent Jobs and Reviews in Frankford, DE
Frankford, DE at a glance
Custom Mechanical has completed 20 jobs in Frankford, DE in March 2026.
The most recent job was on March 18, 2026.
Job Locations and Reviews
Performed cooling system evaluation for customer considering home addition. Checked thermostat functionality (Honeywell unit showing proper operation at 70°F) and measured system amperage (5.22 amps) with Fieldpiece SC260 clamp meter. Advised customer that additional load capacity analysis would be required to determine if existing unit can adequately service the expanded square footage.
Completed installation of plumbing pipes and fixtures for new construction. Installed waste piping through floor and wall cavities, including proper venting systems. Set all fixtures including tub, toilets, and sinks with appropriate supply lines, compression valves, and drainage components in brushed nickel finish as specified.
Performed scheduled cooling maintenance visit with comprehensive electrical testing. Conducted amperage and voltage measurements using Fieldpiece SC640 clamp meter, recording readings of 0.53A/0.9V and 40.1/0.0 at different test points. All electrical parameters verified within manufacturer specifications for optimal system operation.
Conducted follow-up evaluation of existing Carrier HVAC system installed in attic space. System includes air handler with black insulated flexible ductwork, proper connection points secured with foil tape, and integrated PVC drainage. Assessment focused on replacement options previously discussed with customer in prior consultations.
Performed comprehensive HVAC system tune-up, conducting temperature differential testing with digital thermometer. Readings showed 49.8°F at supply and 68.9°F at return, confirming system is operating within normal parameters. Inspection completed on one system as scheduled.
Performed scheduled cooling maintenance service on two systems after customer reported inadequate cooling on top floor. Inspected outdoor unit with insulated refrigerant lines and confirmed proper installation of line insulation. Examined attic air handler installation, checking ductwork connections and inspecting blower motor operation. Resolved cooling issue by cleaning components and optimizing system performance.
Responded to customer concern regarding sump pump malfunction following recent storm. Inspected basement mechanical area with PVC drainage system connected to sump pit. Identified and corrected issue with check valve operation, ensuring proper pump function to prevent water accumulation.
Responded to no heat service call where customer reported system not maintaining set temperature. Inspection revealed compromised ductwork insulation and improper conduit installation in the utility space. Repaired and resealed insulation on main supply duct and secured loose electrical wiring to restore proper system function and heating capacity.
Conducted a geothermal system replacement estimate following referral. Inspected existing installation including ductwork in attic space with insulated components and evaluated current valve assembly/pump station configuration. Documented system conditions with photographs to develop comprehensive replacement proposal for the aging geothermal HVAC equipment.
Performed scheduled maintenance on cooling system as first call of the day. Inspected digital thermostat displaying 68° with set point of 69°. System functioning as designed with no issues identified.
Responded to no heat call for furnace previously serviced. Inspected pressure gauges which showed significant dirt accumulation. System was restored to proper operation after cleaning pressure switches and verifying proper readings.
Performed diagnostic assessment on furnace system, inspecting control components and internal mechanisms. Temperature probe testing indicated elevated readings of 122°F at the supply plenum/duct, confirming proper heat exchanger operation and adequate thermal output.
Successfully removed and disposed of old furnace and installed new Carrier 59SC2E080M17 furnace, integrating with existing coil, AC, and thermostat. System was properly connected with PVC ventilation and drainage components, and final testing confirmed proper draft pressure of 11.85 inwc. Installation includes standard manufacturer warranty coverage.
Performed assessment for downstairs HVAC system replacement. Existing outdoor condensers show significant aging with weathered mounting platform and surrounding vegetation encroachment. Interior inspection revealed need for complete refrigerant line replacement as current lines are buried and inaccessible. Recommended full system replacement including new properly installed refrigerant lines and appropriate system sizing for the space.
Responded to service call for non-operational dehumidifier. Upon inspection, discovered standing water in crawl space with excessive moisture levels. Confirmed Aprilaire humidity controller was functioning and displaying 75% humidity with system in "ON" state. Serviced dehumidifier to restore proper operation and reduce moisture levels in the crawl space.
Responded to emergency water leak from recently installed water heater. Discovered water pooling on garage floor from the Icon System unit mounted on wooden platform. Inspected control panel, connections, and temperature settings; resolved leak by properly securing fittings and ensuring proper operation of the backflow prevention system.
Performed routine cooling system maintenance check. Took supply air temperature reading of 68.0°F at 16"x20"x1" duct. Verified thermostat operation (Honeywell) with proper heat mode function at 67° setpoint and 69° room temperature.
Performed routine heating maintenance on system equipped with Honeywell ProSeries thermostat. Conducted electrical diagnostics using Fieldpiece meter, testing voltage across control board terminals. System operating normally with thermostat properly calibrated and maintaining set temperature parameters.
Conducted assessment of two HVAC systems requiring replacement. Original Rheem unit (model RAPC-036JAZ) installed in 2005 showing age-related wear. Systems serve separate zones (1st/2nd floors and 3rd/4th floors) with controlled damper systems and individual thermostats per floor. Current PROTECH Model 500 digital thermostat maintains functionality but would be upgraded with system replacement.
Technicians installed a 12-inch power closed Honeywell damper in a tight access area. Diagnostic testing was performed on the system wiring, and proper installation was verified with the damper positioned among insulated ductwork in the attic space.
