Ocean View, DE
Unlike some of the other communities in Delaware, Ocean View has been an incorporated municipality for less than 150 years. Prior to its incorporation in 1889, the town served as a small trading post that provided goods and equipment to the farmers and fishermen in the area. During the early 20th century, the area was a productive poultry-producing node and provided fresh meat to many markets in the Northeast and Mid-Atlantic. In 1923, it became the self-proclaimed birthplace of the “broiler chicken,” a now-ubiquitous breed. These days, Ocean View serves as a vacation community as well as a small suburb of nearby Bethany Beach.
Geography
Ocean View is located in the southeastern corner of Delaware. It's part of Sussex County and boasts strong ties to larger towns like Bethany Beach and Rehoboth Beach. While it's not technically adjacent to the Atlantic Ocean, it does border a major inlet known as Indian River Bay. Despite its small size, Ocean View is close to major transportation thoroughfares like Delaware Highways 1 and 26 as well as U.S. Highway 113. Physically, the city's landscape is defined by flat, sandy expanses of meadow and forest. Its neighborhoods are medium-density affairs and were largely built out after World War II.
Population and Demographics
Ocean View has a population of just under 2,000 citizens. Thanks to its proximity to the Atlantic Ocean, the area is a well-known haven for retirees, second-homeowners and snowbirds who move here to escape the harsher winters of inland cities like Cleveland, Pittsburgh and Cincinnati. However, Ocean View does have a notable contingent of longtime residents who can trace their family histories back to the 19th century. As the city grows, many of these residents have been crowded out by rising land prices.
Things to Do in Ocean View, Delaware
Ocean View is defined by its proximity to the Atlantic Ocean. Beach-goers can relax or recreate on the broad beaches of nearby Bethany Beach, and boaters enjoy easy access to the calm waters of Indian River Bay as well as the open waters of the Atlantic. In the inlet that runs near the town's center, robust colonies of ocean fish willingly give themselves up for skilled fishermen. To the south, bird-watchers and botanists can check out the Assawoman Bay State Wildlife Area. Meanwhile, Delaware Seashore State Park occupies a beautiful spit of land between the Intracoastal Waterway and the open waters of the ocean.
Climate and Weather
Ocean View has an oceanic climate that's heavily influenced by the presence of the Gulf Stream as well as the weather systems that move across the North American continent. During the winter, its weather is generally cool and occasionally icy. The transitional seasons bring breezy, often mild weather that's occasionally interrupted by rainstorms and thunderstorms. Summers tend to be hot and humid, but onshore breezes provide welcome relief during the hottest spells. The growing season stretches from late March through late November.
Furnace Repair in Ocean View, Delaware
For more than 40 years, Custom Mechanical has helped residents in Ocean View purchase and install top-notch HVAC systems for structures and rooms of all sizes. The company's technician team has the tools to complete emergency furnace service jobs, installations, repairs, historic-building retrofits and many other tasks. Custom Mechanical's professionals are available on a 24-hour basis and offer top-notch maintenance memberships for customers who want to prevent unnecessary equipment breakdowns. They're also capable of performing value-added services like air quality audits and energy loss evaluations.
From custom HVAC systems to off-the-shelf devices, Custom Mechanical also connects the residents of Ocean View with great deals on high-quality heating and cooling products. The company works with some of the world's most renowned manufacturers and sells a variety of systems, including central air conditioners, indoor air quality equipment, heat pumps, furnaces and more. Ironclad factory warranties, annual service memberships and generous financing deals back up these products and provide much-needed peace of mind. Custom Mechanical also stocks hundreds of accessories and parts for most HVAC systems. With Custom Mechanical, Ocean View enjoys year-round indoor comfort.
Recent Jobs and Reviews in Ocean View, DE
Ocean View, DE at a glance
Custom Mechanical has completed 20 jobs in Ocean View, DE in July 2026.
The most recent job was on July 24, 2026.
Job Locations and Reviews
Completed full HVAC system replacement including removal and disposal of existing equipment. Installed Lennox ML14KP1-030 2.5-ton 14 SEER heat pump on pressure-treated wood platform, Lennox CBK45UHET-030 air handler with 10 kW electric heat pack, and Honeywell TH6320WF digital WiFi thermostat. Fabricated and installed metal duct transitions to adapt new equipment to existing ductwork, replaced outdoor electrical disconnect and whip, reused existing electrical connections and condensation lines, and installed filter grilles (20x20x1 and 14x14x1). System tested and operational with extended warranty coverage.
Responded to service call for Rinnai tankless water heater displaying error code related to condensate system. Performed comprehensive inspection and completed standard tankless water heater flush service to address the issue. Inspected all connections, PVC venting system, copper supply lines, shut-off valves, and expansion tank for proper operation and secured property upon completion.
Responded to service call for HVAC unit with reported system leak located on second floor. Upon inspection of mechanical room, evaluated existing furnace, ductwork, water heater, and associated gas lines and copper piping. Documented current equipment configuration including metallic ductwork, insulated copper lines, and electrical components. Provided comprehensive estimate for complete system replacement to address leak and ensure proper operation of heating equipment.
Completed on-site assessment of bathroom shower valve requiring replacement. Inspected existing Kohler brand shower control fixture with chrome trim plate showing signs of age, mineral deposits, and wear around the central control mechanism. Documented current valve condition and bathroom layout to provide accurate estimate for shower valve replacement, including access considerations and fixture specifications needed for the repair.
Completed scheduled maintenance inspection on second of two tankless water heaters as part of recurring service agreement. Performed comprehensive system evaluation including visual inspection of unit mounting, venting configuration, plumbing connections, gas supply lines, and electrical connections. Verified proper operation of inlet/outlet isolation valves, confirmed adequate clearances around unit, and checked PVC vent pipe installation for secure connections. System found to be operating within normal parameters with no immediate service needs identified.
Completed preventative maintenance cooling visit on one of two systems at property. Performed comprehensive system inspection and diagnostics using digital multimeter to verify proper electrical operation. Measured voltage readings at outdoor unit showing 838V and amperage draw of 63.1A, confirming unit operating within normal parameters. Inspected all electrical connections, wiring terminals, and conduit for proper installation and secure connections. Verified system cooling performance and confirmed equipment functioning correctly with no issues identified.
Completed preventive maintenance visit on Noritz NRC98DV tankless water heater unit rated at 180,000 BTU maximum output. Inspected all plumbing connections including copper supply lines with brass ball valves, PVC drain and vent lines, and verified proper operation of isolation valves. Documented existing installation configuration showing water supply piping, gas connections, and electrical components all functioning within manufacturer specifications. Unit tested and confirmed operational for continued service.
Conducted comprehensive consultation for HVAC system replacement, reviewing existing equipment including vertical air handler unit with condensate drain system and Honeywell digital thermostat. Discussed replacement options, installation procedures, and system specifications with homeowner to determine optimal solution for their heating and cooling needs.
Completed installation of Rinnai RX199i tankless water heater in residential mechanical room. Installation included mounting main unit to wall, connecting water supply lines with 3/4" brass fittings (tee and nipple), installing expansion tank, configuring exhaust system with street 90 and termination pipe kit, and establishing gas line connections using flexible yellow corrugated tubing. Integrated recirculation pump system with appropriate shut-off valves throughout plumbing assembly, installed 3/4" male high-temperature adapters at connection points, and completed all electrical connections to unit. System tested and verified operational with digital display showing proper function. Two-technician installation required six hours to complete all mounting, plumbing, venting, gas, and electrical work to manufacturer specifications.
Responded to no cooling complaint on first floor system. Upon arrival, diagnosed and resolved cooling issue on primary unit. Verified both systems operational and performed preventive tune-up maintenance on both HVAC systems. Supply air temperatures measured at 60.2°F and 53°F respectively, confirming adequate cooling performance on both units after service completion.
# HVAC Service Report Responded to no cooling complaint at residential property. Upon arrival, accessed utility closet and inspected air handler/furnace unit. System evaluation revealed failed evaporator coil with visible refrigerant leak. Coil had deteriorated beyond repair, causing complete loss of cooling capacity. Removed defective evaporator coil assembly and disposed of failed component outside per EPA refrigerant handling protocols. Recommended complete coil replacement to restore system functionality. Unit requires new evaporator coil installation and refrigerant recharge to return to operational status.
Installed new Mustee #19CF utility sink with Moen #8277 faucet in laundry room adjacent to existing washer box. Removed approximately 4' square section of drywall to access existing drain lines and assess routing requirements. Connected new drain system using 2" x 1½" PVC DWV tee tied into existing 2" drain line with Schedule 40 PVC pipe and couplings. Installed 1½" PVC drain piping with 90-degree elbows, female adapter, in-line vent, P-trap, and flanged tailpiece to properly vent and drain new fixture. Tapped into existing PEX water supply lines using brass SharkBite tees and ran new ½" CPVC supply piping approximately 15 feet to sink location. Installed chrome compression angle stop valves with escutcheon plates and connected fixture using stainless steel supply lines. All plumbing installed per code with proper venting and drainage slope. System tested and verified leak-free operation.
# HVAC Service Report Responded to no cooling complaint on Luxaire split system. Upon arrival, found system not operating. Connected manifold gauges to service ports on indoor unit refrigerant lines. Performed diagnostic testing and system evaluation. Refrigerant lines showed evidence of recent service work with red caps on connection points. Inspected outdoor condenser unit and found equipment in weathered but operational condition. Electrical disconnect and wiring connections verified at outdoor unit location. System assessed and service procedures completed to restore cooling operation.
Responded to no cooling complaint at rental property. Upon arrival, found thermostat displaying 86°F with system calling for cooling. Performed system diagnostics and measured supply air temperature at floor register, which indicated inadequate cooling output. Documented static pressure readings using digital manometer showing 3508 reading. Verified thermostat operation and confirmed system was running in cooling mode with fan set to auto. Captured diagnostic measurements and system conditions for further evaluation of cooling deficiency.
Completed full HVAC system replacement including removal and disposal of existing equipment. Installed new Carrier 26SCA518A003 1.5-ton 15 SEER air conditioning condenser unit on existing outdoor stand with decorative river rock landscaping. Mounted new Carrier FJ5ANXB18L00 air handler indoors with filter at unit. Fabricated and installed metal duct transitions to adapt new equipment to existing ductwork. Replaced outdoor electrical disconnect and whip while reusing existing electrical service, condensation drain lines, and refrigerant line sets. Installed Honeywell Home digital WiFi thermostat with programmable controls, humidity monitoring, and air quality display. Verified system operation with unit cooling properly to setpoint. Installation includes one-year parts and labor warranty from installation date.
Responded to service call for difficult-to-operate cold water faucet handle in master bathroom. Upon inspection, found wall-mounted three-piece faucet assembly with separate hot and cold control valves and center spout. Diagnosed stiff cold water valve operation likely caused by mineral buildup or worn internal cartridge components. Disassembled cold water control valve, inspected cartridge mechanism, cleaned mineral deposits, and lubricated moving parts. Tested valve operation to ensure smooth handle rotation and proper water flow control. Verified no leaks at valve body or wall connections. Faucet now operates smoothly with full range of motion restored to cold water handle.
Responded to service call for loud "jet engine" noise originating from crawlspace HVAC unit on 8-year-old system. Upon arrival, noise had ceased when thermostats were adjusted upward. Inspected zone control panel (HZ322) and verified proper operation of all three zones with correct wiring connections and terminal integrity. Accessed crawlspace unit and observed significant condensation accumulation on ductwork and metal surfaces, indicating high humidity conditions and possible airflow restriction. Deployed diagnostic equipment to assess system performance and airflow parameters. System currently operational for both heating and cooling modes with no active fault codes present. Advised customer that intermittent noise may be related to recent baffle modifications affecting airflow dynamics or blower motor operation under high-demand conditions, and recommended monitoring system performance as outdoor temperatures increase.
Conducted estimate for complete HVAC system replacement in crawl space. Assessed existing York heating and cooling unit, including horizontal furnace installation with current ductwork and PVC venting configuration. Documented equipment condition, spatial constraints, and provided recommendations for new system installation to replace aging unit.
Performed scheduled maintenance service on a 50-gallon tall water heater with expansion tank that was installed in 2021. Completed comprehensive water heater flush procedure to remove sediment buildup and maintain optimal performance. Inspected all plumbing connections, verified proper operation of temperature and pressure relief valve, confirmed expansion tank functionality, and documented equipment condition with photographs showing proper installation, safety labeling, and associated condensate drainage system.
Responded to customer complaint of banging noise during unit operation. Performed diagnostic inspection of air conditioning system and measured temperature differentials across the evaporator coil, recording supply air temperature of 52.3°F and return air temperature of 87.9°F, confirming proper system cooling performance with approximately 35°F temperature split. Inspected air handler cabinet, ductwork connections, and internal components for loose hardware or debris causing mechanical noise. System operating within normal parameters at time of service completion.
